Nearwire support

Nearwire is available on the App Store for iPhone and iPad. Visit the Nearwire app page for the download link. The Mac and Android instructions below also apply to devices already running Nearwire.

Move files directly between Android, Mac, iPhone and iPad devices over your local network. Nearwire uses no cloud file relay: the two devices connect to each other after you verify a matching pairing code.

What you need

  • Two or more devices running Nearwire, in any combination: Android 7.0 or later, macOS 13 or later, or an iPhone or iPad with iOS 17 or iPadOS 17 or later.
  • Nearwire open on both devices. On iPhone and iPad, keep Nearwire open in the foreground during transfers; iOS can pause network activity when the app is in the background.
  • Both devices connected to the same compatible Wi-Fi or wired local network.

Nearwire supports Android ↔ Android, Mac ↔ Mac, and Android ↔ Mac transfer, plus iPhone/iPad ↔ Android, iPhone/iPad ↔ Mac, and iPhone/iPad ↔ iPhone/iPad transfer. Windows and Linux companions are not part of this release.

Pair your devices

  1. Open Nearwire on both devices.
  2. On the receiving Android device, enable Receiver. On a receiving iPhone or iPad, turn on Receive files on the Receive tab and keep Nearwire open. A receiving Mac advertises itself while Nearwire is running.
  3. Open the device list (on iPhone and iPad, the Send tab) and choose the other device.
  4. Compare the six-digit code shown on both screens.
  5. If the codes match, approve pairing on both devices.

Do not approve a pairing request you did not start or a code that does not match. You can remove a paired device later from Nearwire's device settings.

Send from Android

You can select files inside Nearwire, use Android's system file or photo picker, or choose Share in another app and select Nearwire. Pick the paired device, review the selection, and start the transfer.

Keep Nearwire's transfer notification visible while a send is active. It shows progress and provides the available Cancel or Manage action.

Send from Mac

Drag files onto the Nearwire menu-bar icon to load the Send view. Choose the paired device, review the files, and select Send. A receiving Android device must have Receiver enabled; its persistent notification provides a Stop control. A receiving iPhone or iPad must have Receive files turned on with Nearwire open.

Send from iPhone or iPad

On the Send tab, choose files from Files or photos and videos from Photos, or choose Share in another app and select Nearwire. Pick the paired device, review the selection, and start the transfer. Keep Nearwire open until the transfer finishes.

Where received files go

Received Android files are saved in the Nearwire folder under Downloads unless you selected another supported destination in the app.

On iPhone and iPad, received files are saved in the Received folder inside Nearwire, which you can open in the Files app under On My iPhone or On My iPad. To use another folder, turn off Receive files and choose Choose receive folder on the Receive tab.

Smart Sync

Smart Sync watches one folder you explicitly choose and queues new files for a paired device. It is not a mirrored or bidirectional filesystem. On Android, Nearwire first shows a brief Preparing folder watch status; new-file detection begins when that folder shows as ready and runs while Nearwire is open. An ongoing notification appears only while a queued file is actively being sent. The Mac menu-bar app can keep watching its selected folder while it is running. On iPhone and iPad, Smart Sync runs only while Nearwire is open; pending transfers are saved when the app goes into the background. You can pause or stop Smart Sync at any time.

Clipboard Sync

Clipboard Sync is optional and off by default. Enable it only when you want clipboard text sent to the paired device. On iPhone and iPad, receiving clipboard text also requires Receive files to be on with Nearwire open. Nearwire has no public clipboard feed and does not upload clipboard content to Lightpath Apps.

Secure Vault

File transfer, Smart Sync and Clipboard Sync are free. Secure Vault is an optional, encrypted local folder unlocked by a one-time in-app purchase.

One Apple purchase covers iPhone, iPad and Mac: buying the Vault with an Apple Account unlocks it in Nearwire on iPhone, iPad and Mac signed in to the same Apple Account. Google Play purchases are separate. A Google Play purchase does not unlock iPhone, iPad or Mac, and an Apple purchase does not unlock Android. Each store shows the localized price before purchase.

To recover a valid purchase, open the Vault paywall or Vault section in Settings and choose Restore Purchases. If restore does not complete, confirm that the device is using the same store account that made the purchase (the same Apple Account on iPhone, iPad and Mac) and has an internet connection. Android and Mac validate purchases with the store and RevenueCat; iPhone and iPad verify them on the device with Apple's StoreKit.

Permissions

Nearwire asks only for access needed by features you use:

  • Nearby Devices / Wi-Fi on Android: discover and connect to nearby devices running Nearwire.
  • Location on Android 12 and earlier: required by Android for nearby Wi-Fi discovery. Nearwire does not read, store, or transmit your location.
  • System file or media selection (including the Photos and Files pickers on iPhone and iPad): read only the items you choose to send.
  • Files and Folders on Mac: read selected files and save accepted files.
  • Notifications: show pairing, transfer, receiver, and Smart Sync status.
  • Local Network on Mac, iPhone and iPad: discover and communicate with nearby devices running Nearwire.
  • Face ID on iPhone and iPad (optional): unlock a Vault with Face ID if you turn on biometric unlock. iOS performs the check; Nearwire never receives face data.

If the devices do not appear

  1. Confirm both devices are on the same local network and Nearwire is open.
  2. Confirm Receiver is enabled on a receiving Android device, or Receive files is on with Nearwire open on a receiving iPhone or iPad.
  3. Grant the requested Nearby Devices / Wi-Fi and Local Network permissions. On iPhone and iPad, check Settings > Privacy & Security > Local Network > Nearwire.
  4. Temporarily disable a VPN, guest-network isolation, or firewall rule that prevents devices on the LAN from reaching one another.
  5. Stop and restart discovery in Nearwire, then reopen the app if necessary.

Corporate, school, hotel, and guest networks sometimes isolate devices from one another. In that case, try a trusted local network that permits device-to-device communication.

If a transfer stops or fails

  • Keep both devices awake and connected to the same network.
  • Check Nearwire's notification or transfer history for the actionable error.
  • Retry after confirming the receiving device has available storage and the selected destination is writable.
  • Do not assume a partial or interrupted transfer succeeded. Confirm the file appears at the destination and opens correctly.

For a large or important file, compare its size—and a checksum when practical— on both devices after completion.

Send a diagnostic report

Nearwire can prepare a filtered diagnostic report from Settings. The report is created locally. Nothing is submitted automatically, and transferred file contents are never attached.

  • Android and Mac: the report opens in your email app, where you can review, edit, remove, or decline to send it.
  • iPhone and iPad: open Settings > Diagnostics. Review or edit the report, which includes up to 256 KB of recent logs, then tap Share report and send it yourself through the share sheet, for example with Mail to [email protected].

Free-form logs can still contain context such as a file or device name that an automatic filter does not recognize. Review the report before sending it.

Privacy and data deletion

Read the Nearwire privacy policy for details about local transfers, optional support reports, the Vault purchase, StoreKit, RevenueCat, retention, and deletion.

Nearwire has no account system, and the iPhone and iPad app does not use RevenueCat. To request deletion of the anonymous RevenueCat customer record associated with an Android or Mac installation, email [email protected] with the subject Nearwire purchase data deletion. Include the platform and the store transaction details needed to locate the anonymous record. Lightpath Apps can delete the RevenueCat record; Apple and Google retain store transaction records under their own obligations.

Deleting a RevenueCat record does not revoke a valid store purchase. Restoring that purchase later may create a new anonymous RevenueCat record so the store entitlement can be validated again.

Contact support

Email [email protected]. Include:

  • Android, macOS, iOS or iPadOS version.
  • Nearwire version.
  • Which direction you were sending.
  • The exact message Nearwire displayed.
  • Whether pairing and smaller transfers work on the same network.

Do not email private keys, passwords, Vault passphrases, or confidential files.